... FREE DELIVERY WITH 4 OR MORE ITEMS IN YOUR CART ...

WALLTRIMS.CO.UK

Shopping Cart

Metal Square Tile Trim | 8mm | Bright Rose | 2500mm Length

Type Metal Square Tile Trim
Width 10mm
Height 8mm
Length 2500mm
Colour Bright Rose

£20.99

SKU TDP080.99 Bright Rose Category

The Metal Square Tile Trim 8mm Bright Rose 2500mm is a versatile profile that provides a luxurious finish to any edge. Unlike ordinary straight edge or L angle aluminium profiles, this trim can be used as an edge trim on vertical wall tiles, horizontal floor tiles, or even as a feature strip in wall or floor applications. Measuring 8mm in height and 2500mm in length, this extruded aluminium profile gives a square appearance when installed and comes with internal and external corner pieces to eliminate sharp edges.

Ideal Choice: Metal Square Tile Trim 8mm Bright Rose 2500mm

Installing the Metal Square Tile Trim is straightforward. Begin by ensuring the surface is smooth, dry, and free from dust, grease, or loose paint. Apply tile adhesive over the area forming the perimeter of the tiled covering. Press the perforated anchoring leg of the profile into the tile adhesive and align it, using mechanical fixings if necessary. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, making sure the profile is not higher than the tiled surface. Finally, fill the joint completely with grout.

The Charm of Bright Rose

Maintaining the Metal Square Tile Trim is simple. While it does not require special maintenance, oxidation films on aluminium can be removed with a common polishing agent, though they may reoccur. Damaged anodised finishes can only be repaired by recoating. Aluminium should be tested for suitability in environments with potential chemical exposure. To prevent corrosion, promptly remove any adhesive or grout residue from visible surfaces and ensure the profile is fully embedded in the setting material to avoid the accumulation of alkaline water. The anodised layer retains a uniform appearance during normal use but is susceptible to scratching and wear, so setting materials should be removed immediately. If you need any assistance or advice on choosing the right tile trim or the installation process, our sales team is ready to help.